
WiFi Shield EiFi Expansion Board - White
US$ 32.57
US$ 37.57
: In stock
: 189923
- Quantity: 1 piece- Color: White- Material: FR4- Freadiono WiFi Shield EiFi utilizes a WizFi210 WiFi module to provide your Arduino / Freaduino with Serial Ethernets function. It provides the...
Share:
- Quantity: 1 piece
- Color: White
- Material: FR4
- Freadiono WiFi Shield EiFi utilizes a WizFi210 WiFi module to provide your Arduino / Freaduino with Serial Ethernets function. It provides the bridging from TTL serial port communication to IEEE802.11b/g/n wireless communication. So any device with TTL serial ports can easily be connected with this Wi-Fi module and controlled and managed remotely through a wireless network. Different kinds of communication protocols and encryption algorithms are integrated with the module. The Arduino architecture enables you to easily integrate this module into any Arduino based project.
- Wi-Fi Chip: WizFi210
- Radio Protocol: IEEE 802.11b/g/n compatible
- Supported Data Rates: 11 / 5.5 / 2 / 1Mbps (IEEE 802.11b)
- Modulation: DSSS and CCK
- RF Operating Frequency: 2.4~2.497 GHz
- Antenna Options: Chip antenna and U.FL connector for external antenna
- Networking Protocols: UDP TCP/IP (IPv4) DHCP ARP DNS HTTP/HTTPS Client and Server(*)
- Power Consumption (Typical): Standby: 34.0uA; Receive: 125.0 mA; Transmit: 135.0 mA
- RF Output Power (Typical): 8dBm +/- 1dBm
- Security Protocols: WEP WPA/WPA2PSK Enterprise EAP-FAST EAP-TLS EAP-TTLS PEAP
- I/O Interface: UART SPI(*) I2C(*) WAKE ALARM GPIOs
- System Working Voltage: 3.3V
- Dimensions(except Antenna): 59 x 50 mm
- Support Software/Hardware Serial port communication to Arduino.
- The WizFi210's SPI and IIC interface has been connect to Arduino.
- The Limited AP Feature support Direct Connection to Iphone Ipad and Android-Phone without AP.
- Operates with standard 802.11 b/g/n access points at speed up to 11Mbps (802.11b) and Rich I/O interfaces (SPI UART GPIO I2C ADC JTAG).
- Support upgrade Firmware by user you can get the newest Firmware from Wizinet.
- Simple AT commands for configuration and data communication
- Low power modes alarm input for wake-up
- Packing list:
- 1 x Wi-Fi shield - EiFi expansion board
- 1 x Antenna
- 2 x 8 pin female to female header connectors
- 2 x 6 pin female to female header connectors
- 2 x Short caps
- Color: White
- Material: FR4
- Freadiono WiFi Shield EiFi utilizes a WizFi210 WiFi module to provide your Arduino / Freaduino with Serial Ethernets function. It provides the bridging from TTL serial port communication to IEEE802.11b/g/n wireless communication. So any device with TTL serial ports can easily be connected with this Wi-Fi module and controlled and managed remotely through a wireless network. Different kinds of communication protocols and encryption algorithms are integrated with the module. The Arduino architecture enables you to easily integrate this module into any Arduino based project.
- Wi-Fi Chip: WizFi210
- Radio Protocol: IEEE 802.11b/g/n compatible
- Supported Data Rates: 11 / 5.5 / 2 / 1Mbps (IEEE 802.11b)
- Modulation: DSSS and CCK
- RF Operating Frequency: 2.4~2.497 GHz
- Antenna Options: Chip antenna and U.FL connector for external antenna
- Networking Protocols: UDP TCP/IP (IPv4) DHCP ARP DNS HTTP/HTTPS Client and Server(*)
- Power Consumption (Typical): Standby: 34.0uA; Receive: 125.0 mA; Transmit: 135.0 mA
- RF Output Power (Typical): 8dBm +/- 1dBm
- Security Protocols: WEP WPA/WPA2PSK Enterprise EAP-FAST EAP-TLS EAP-TTLS PEAP
- I/O Interface: UART SPI(*) I2C(*) WAKE ALARM GPIOs
- System Working Voltage: 3.3V
- Dimensions(except Antenna): 59 x 50 mm
- Support Software/Hardware Serial port communication to Arduino.
- The WizFi210's SPI and IIC interface has been connect to Arduino.
- The Limited AP Feature support Direct Connection to Iphone Ipad and Android-Phone without AP.
- Operates with standard 802.11 b/g/n access points at speed up to 11Mbps (802.11b) and Rich I/O interfaces (SPI UART GPIO I2C ADC JTAG).
- Support upgrade Firmware by user you can get the newest Firmware from Wizinet.
- Simple AT commands for configuration and data communication
- Low power modes alarm input for wake-up
- Packing list:
- 1 x Wi-Fi shield - EiFi expansion board
- 1 x Antenna
- 2 x 8 pin female to female header connectors
- 2 x 6 pin female to female header connectors
- 2 x Short caps
